Full Length Die Set

• Industry standard 1 1/2-12" thread.
• 2 die set includes Full Length Sizer and a Crimping Seater.
• Does NOT include shell holder.

Full Length Sizer

• Industry standard 1 1/2-12" thread.
• Includes a decapping assembly for large primers and an expander ball for use with a 0.375" bullet.

Neck Sizer

• Industry standard 1 1/2-12" thread.
• Includes a decapping assembly for large primers and an expander ball for use with a 0.375" bullet.

Crimping Seater

• Industry standard 1 1/2-12" thread.
• Designed for use with a 0.375" bullet.
• This Crimping Seater includes a seating stem with our exclusive Venturi profile which evenly spreads the seating forces over a concentrically tapered area that greatly reduces or eliminates ring marks in your bullets.

File Trim

The most consistent way to trim your cases. Simply file off and deburr anything that protrudes from the die.

File Trim dies are also extensively sized and used as the final forming die in many of our form sets.

• Industry standard 1 1/2-12" thread.

Rock Crusher Press - 2 in

T075 Threaded Shell Holder

• Industry standard 7/8-14" thread.

Our threaded shell holders are designed for use with larger threaded ram presses as well as for priming and swaging in the top of standard presses.

Standard Deburring Tool

Chamfers and deburs the inside and outside of the case mouth for easy bullet seating.

• Works on all cases from 45 to 60 caliber.
• Hardened to 59 Rockwell C for extra long life.

2-12 x 1 1/2-12 Press Top Bushing

• Industry standard thread : .
• Designed for use with all modern presses that accept interchangeable top bushings.