Full Length Die Set

• Industry standard 7/8-14" thread.
• 3 die set includes Full Length Sizer, Expander, and a Crimping Seating die.
• Does NOT include shell holder.

Full Length Sizer

• Industry standard 7/8-14" thread.
• Includes a generic large rifle primer decapping assembly with no expander ball.

Neck Sizer

• Industry standard 7/8-14" thread.
• Includes a generic large rifle primer decapping assembly with no expander ball.

Crimping Seater

• Industry standard 7/8-14" thread.
• Designed for use with a 0.446" bullet.
• This Crimping Seater includes a seating stem with our exclusive Venturi profile which evenly spreads the seating forces over a concentrically tapered area that greatly reduces or eliminates ring marks in your bullets.

Taper Crimp

Taper crimp dies squeeze the sides of the case wall tightly against the bullet, which effectively prevents the bullet from moving while maintaining the nice square edge of the case mouth.

• Industry standard 7/8-14" thread.

File Trim

The most consistent way to trim your cases. Simply file off and deburr anything that protrudes from the die.

File Trim dies are also extensively sized and used as the final forming die in many of our form sets.

• Industry standard 7/8-14" thread.

Dillon Trim

For use with Dillon's RT1500 Electric Case Trimmer.

Form Dies

Forming dies are an integral part of reloading for wildcat/obsolete calibers. Many of the calibers in our caliber list are no longer in production and the needed components cannot be purchased. Form dies allow you to make your cases from another caliber that is available.

These dies are very specific and as such are custom order items. Please call for application and availability.

• Industry standard 7/8-14" thread.

Reamer Die

• Industry standard 7/8-14" thread.
• Complete with reamer.

Standard Deburring Tool

Chamfers and deburs the inside and outside of the case mouth for easy bullet seating.

• Works on all cases from 45 to 60 caliber.
• Hardened to 59 Rockwell C for extra long life.

1 1/4-12 x 7/8-14 Press Top Bushing

• Industry standard thread : .
• Designed for use with all modern presses that accept interchangeable top bushings.