Full Length Die Set

• Industry standard 1 1/2-12" thread.
• 2 die set includes Full Length Sizer and a Crimping Seater.
• Does NOT include shell holder.

Full Length Sizer

• Industry standard 1 1/2-12" thread.
• Includes the strongest available 7/16" decapping rod with integral expander ball and heavy-duty pin.

Neck Sizer

• Industry standard 1 1/2-12" thread.
• Includes the strongest available 7/16" decapping rod with integral expander ball and heavy-duty pin.

Bushing Neck Sizer

• Industry standard 1 1/2-12" thread.
• Includes the strongest available 7/16" decapping rod with no expander ball and heavy-duty pin.
• Bushings are available in .001" increments, sizes .538" to .553"

Crimping Seater

• Industry standard 1 1/2-12" thread.
• Designed for use with a 0.510" bullet.
• This Crimping Seater includes a seating stem with our exclusive Venturi profile which evenly spreads the seating forces over a concentrically tapered area that greatly reduces or eliminates ring marks in your bullets.

50 BMG Straight Line Seater

• Minimize your bullet seating run-out with this precision seating tool.
• Industry standard 1 1/2-12" thread.

File Trim

The most consistent way to trim your cases. Simply file off and deburr anything that protrudes from the die.

File Trim dies are also extensively sized and used as the final forming die in many of our form sets.

• Industry standard 1 1/2-12" thread.

50 BMG Blank Crimp Die

• Designed to with a six segment rose crimp.
• Industry standard 1 1/2-12" thread.

Rock Crusher Press - 2 in

T075 Threaded Shell Holder

• Industry standard 1 1/2-12" thread.
• Includes the strongest available 7/16" decapping rod with integral expander ball and heavy-duty pin.

Magnum Deburring Tool

Chamfers and deburs the inside and outside of the case mouth for easy bullet seating.

• Works on all cases from 17 to 45 caliber.
• Hardened to 59 Rockwell C for extra long life.

2-12 x 1 1/2-12 Press Top Bushing

• Industry standard thread : .
• Designed for use with all modern presses that accept interchangeable top bushings.

50 BMG Priming & Swage Tool

• Includes standard 7/8-14" threaded shell holder, swage post, and priming post.